DOWNLOAD TECNO POP 2 B1 FACTORY SIGNED FIRMWARE / STOCK ROM

Hits: 84

DOWNLOAD TECNO POP 2 B1 FACTORY SIGNED FIRMWARE / STOCK ROM

Tecno Pop 2 Quick Review
Tecno Pop 2 runs on Android 8.1 Oreo Go edition themed with HiOS 3.3.

This device is a 5.5-inch ips touchscreen display with a resolution of 720 X 1440 pixels 293ppi. A size of 149.4 x 72.8 x 9.3 mm and weighs about 145g.
Powered by 1.3GHz quad-core processor MediaTek MT6580A with 1GB of RAM. There’s also 8GB of internal storage which can be expanded up to 64GB with microSD. 
There is a 5 MP primary camera with LED Flash and a 8-mega pixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM+WCDMA+4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 2400Mah non-removable battery




DOWNLOAD TECNO POP 2 B1 STOCK ROM

B1-F8018BC-GO-181117V124 DOWNLOAD ROM=============================== B1-F8018D-GO-181114V70 DOWNLOAD ROMHow to flash this device using SP Flash ToolNote Follow the instructions on how to flash the device carefully below I will not take responsibility on whatever may happen to your device. Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because   flashing a wrong preloader, will make the device completely dead  (can’t power on, can’t charge and will not be detected by a computer)



Download, MTK VCOM USB drivers
Download and extract Tecno flashtool Launch SWD_AfterSales inside the extracted folder Click on settings icon
Click on load button Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu.
Click Confirm Button.
Now turn off and connect your device to PC.
Wait for flashing process to complete.
Reboot device

NOTE
If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.


If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

GurusFirmware

Read Previous

DOWNLOAD INFINIX NOTE 4 X572 STOCK ROM / FIRMWARE [Factory-Signed Firmware]Gurusrom

Read Next

DOWNLOAD TECNO CAMON X Pro CA8 STOCK ROM / SIGNED FIRMWARE

Leave a Reply

Your email address will not be published. Required fields are marked *