DOWNLOAD TECNO CAMON X Pro CA8 STOCK ROM / SIGNED FIRMWARE

Hits: 17

DOWNLOAD TECNO CAMON X Pro CA8 STOCK ROM / SIGNED FIRMWARE

Tecno Camon X Pro quick specs & features
Tecno  Camon X Pro runs on Android 8.1 Oreo themed with HiOS 3.3.

This device is a 6.0-inch ips touchscreen display with a resolution of 1080 X 1520 pixels, 402ppi. A size of 156.9 x 75.3 x 7.8 mm and weighs about 148g.
Powered by 2.0GHz quad-core Helio P23 MediaTek MT6761 processor  with PowerVR GE8320 and 4GB of RAM. There’s also 64GB of internal storage which can be expanded up to 128GB with microSD. 
There is a 16 MP primary camera with LED Flash and a 24 megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.2. Supports GSM, WCDMA and 4G LTE networks. Sensors on this phone include fingerprint scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 3750Mah non-removable battery

DOWNLOAD TECNO CAMON X Pro CA8 STOCK ROM

CA8-H633EFG-O-V2-181120V207
DOWNLOAD ROM

===============================

CA8-H633EFG-O-181120V219
DOWNLOAD ROM
How to flash this device using Tecno Flash Tool
Note Follow the instructions on how to flash the device carefully below I will not take responsibility on whatever may happen to your device. Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because   flashing a wrong preloader, will make the device completely dead  (can’t power on, can’t charge and will not be detected by a computer)
Download, MTK VCOM USB drivers
Download and extract Tecno flashtool Launch SWD_AfterSales inside the extracted folder Click on settings icon
Click on load button Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu
Click Confirm Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device



NOTE
If the while loading the scatter file you see checksum error, copy and checksumgen.exe into the firmware folder.

You can also use other tools like SP Flash Tool, WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

GurusFirmware

Read Previous

DOWNLOAD TECNO POP 2 B1 FACTORY SIGNED FIRMWARE / STOCK ROM

Read Next

DOWNLOAD INFINIX X600 STOCK ROM/FIRMWARE

Leave a Reply

Your email address will not be published. Required fields are marked *