A GUIDE TO SUCCESFULLY UPDATING THE TECNO DROID 7C DROID 7CS DROID 7C PRO TABLETS
Tecno 7C Droid Software Issues delayed booting
Display issues after flashing network issues [invalid IMEI]
Poor network signal issue battery quick drain or low battery life
Distorted screen resulting issues occasional rebooting and hanging theft code issue (change of sim)
Upgrading Tecno droid 7C 7CS 7CPRO
Below are illustration of the procedure to upgrade the droid Tecno tablets without any much hassle or flaw:-
– make sure software to be flashed when loaded in the flash tool that all needed partitions and regions are well displayed.
– Make sure the scatter file contains the necessary partition listed in the firmware folder in its internal code when edited if not so consider editing or modifying the scatter or downloading another firmware that will ensure all regions are listed in the tool when executed
– Make sure battery level is above 30% before the upgrade process begin to avoid a possibility of having a tablet with dead bootloader at the end of the operation.
– Power down the device and connect the tablet to the pc and wait for pc detection then the flashing operation would start by automated process